Axis F41 User Manual

Also see for F44: User manual User manual Installation guide Installation guide User manual

Contents

AXIS F41 Main UnitSystem OptionsNote• If the product is reset to factory default, all certificates, except preinstalled CA certificates, will be deleted.• If the product is reset to factory default, all preinstalled CA certificates that have been deleted will be reinstalled.How to create a self-signed certificate1. Go to Setup > System Options > Security > Certificates.2. Click Create self-signed certificate and provide the requested information.How to create and install a CA-signed certificate1. Create a self-signed certificate, see How to create a self-signed certificate on page 48.2. Go to Setup > System Options > Security > Certificates.3. Click Create certificate signing request and provide the requested information.4. Copy the PEM-formatted request and send to the CA of your choice.5. When the signed certificate is returned, click Install certificate and upload the certificate.How to install additional CA certificates1. Go to Setup > System Options > Security > Certificates.2. Click Install certificate and upload the certificate.Audio SupportSelect Enable audio support to allow clients to retrieve audio streams from the Axis product. For information on how to configureaudio settings, see Set Up Audio on page 25.NoteDeselecting this option will disable audio globally in the Axis product, for configured events and profiles with audio as well.Date & TimeThe Axis product’s date and time settings are configured under System Options > Date & Time.Current Server Time displays the current date and time (24h clock). The time can be displayed in 12h clock in the text overlay (seebelow).To change the date and time settings, select the preferred Time mode under New Server Time:• Synchronize with computer time – Sets date and time according to the computer’s clock. With this option, date andtime are set once and will not be updated automatically.• Synchronize with NTP Server – Obtains date and time from an NTP server. With this option, date and time settings areupdated continuously. For information on NTP settings, see NTP Configuration on page 51.If using a host name for the NTP server, a DNS server must be configured. See DNS Configuration on page 51.• Set manually – Allows you to manually set date and time.If using an NTP server, select your Time zone from the drop-down list. If required, check Automatically adjust for daylight savingtime changes.48