Axis M11 Series User Manual

Also see for M11 Network Camera Series: User manual User manual User manual User manual Installation guide

AXIS M11 Network Camera SeriesAdditional settingsTo trigger the camera to start recording when it receives a signal from the PIR detector, you need to create a rule in the camera’swebpage.Direct the camera to a preset position when the camera detects motionThis example explains how to set up the camera to go to a preset position when it detects motion in the image.Make sure that AXIS Video Motion Detection is running:1. Go to Settings > Apps > AXIS Video Motion Detection.2. Start the application if it is not already running.3. Make sure you have set up the application according to your needs.Add a preset position:Go to Settings > PTZ and set where you want the camera to be directed by creating a preset position.Create a rule:1. Go to Settings > System > Events > Rules and add a rule.2. Type a name for the rule.3. In the list of conditions, select a video motion detection condition under Application.4. From the list of actions, select Go to preset position.5. Select the preset position you want the camera to go to.6. Click Save.Send an email automatically if someone spray paints the lens1. Go to System > Detectors.2. Turn on Trigger on dark images. This will trigger an alarm if the lens is sprayed, covered, or rendered severely out of focus.3. Set a duration for Trigger after. The value indicates the time that must pass before an email is sent.Create a rule:1. Go to Events > Rules and add a rule.2. Type a name for the rule.3. In the list of conditions, select Tampering.4. In the list of actions, select Send notification to email and then select a recipient from the list. Go to Recipientsto create a new recipient.To create a new recipient, click . To copy an existing recipient, click .5. Type a subject and a message for the email.6. Click Save.19