Axis M3011 Installation Manual

Also see for M3011: Datasheet User manual Datasheet Datasheet Installation guide

Contents

AXIS M3011/M3014 Installation Guide Page 13ENGLISHLED indicatorsAccessing AXIS M3011/M3014 Network Camera from the InternetOnce installed, the AXIS M3011/M3014 Network Camera is accessible on your local network (LAN).To access the camera from the Internet, network routers must be configured to allow incomingtraffic, which is usually done on a specific port. Please refer to the documentation for your routerregarding this.For more information on this and other topics, visit the Axis Support Web atResetting to the Factory Default SettingsThis will reset all parameters, including the IP address, to the Factory Default settings:1. Disconnect power from the camera.2. Press and hold the Control button and reconnect power.3. Keep the control button pressed until the Status Indicator displays amber (this may take up to15 seconds).4. Release the control button.5. When the Status Indicator displays green (which can take up to 1 minute) the process iscomplete and the camera has been reset.6. Re-install AXIS M3011/M3014 Network Camera using one of the methods described in thisdocument.More informationIt is also possible to reset all parameters, except the IP parameters, to the original factory settingsvia the web interface. For more information, please refer to the online help and the user’s manual.The AXIS M3011/M3014 Network Camera User’s Manual is available from the Axis Web site at orfrom the Axis Network Video Product CD.LED Color DescriptionNetwork Green Steady for connection to 100 Mbit/s network. Flashes for network activity.Amber Steady for connection to 10 Mbit/s network. Flashes for network activity.Unlit No connection.Status Green Shows steady green for normal operation.Note: The Status LED can be configured to be unlit during normal operation, or to flashonly when the camera is accessed. See the online help files for more information. Go toSetup > System Options > LED settingsAmber Steady during startup, reset to factory default or when restoring settings.Red Slow flash for failed upgrade.Power Green Normal operation.Amber Flashes green/amber during firmware upgrade.www.axis-shop.ru

/ 13

Related manuals for Axis M3011