Axis M3024–LVE User Manual

Also see for AXIS M3024-LVE: Installation manual Manual User manual

Axis M3024–LVE User Manual Manual pdf 9 page image

AXIS M3024–LVE Network CameraAccessing the ProductSet Power Line FrequencyPower line frequency is set the first time the Axis product is accessed and can only be changed from Plain Config (see page 47)or by resetting the product to factory default.Select the power line frequency (50 Hz or 60 Hz) used at the location of the Axis product. Selecting the wrong frequency may causeimage flicker if the product is used in fluorescent light environments.When using 50 Hz, the maximum frame rate is limited to 25 fps.NotePower line frequency varies depending on geographic region. The Americas usually use 60 Hz, whereas most other parts ofthe world use 50 Hz. Local variations could apply. Always check with the local authorities.The Live View PageThe controls and layout of the Live View page may have been customized to meet specific installation requirements and userpreferences. Consequently, some of the examples and functions featured here may differ from those displayed in your own Live Viewpage. The following provides an overview of each available control.Controls on the Live View PageClick View size to scale the image down to 800 pixels wide or to full scale. Only available in MJPEG.Select a stream profile for the Live View page from the Stream Profile drop-down list. For information about howto configure stream profiles, see page 17.Click Pulse to activate the product’s output port for a defined period of time. For information about how to enableand configure output buttons, see page 22.9