Axis M3045-WV User Manual

Also see for M1065-LW: Installation guide Installation guide User manual Installation guide User manual

Contents

AXIS M3045-WV Network CameraSetupEventsRules and alertsYou can create rules to make your device perform an action when certain events occur. A rule consists of conditions and actions.The conditions can be used to trigger the actions. For example, the device can start a recording or send an email when it detectsmotion, or show an overlay text when it records.Trigger an action1. Go to Settings > System > Events to set up a rule. The rule defines when the camera will perform certain actions. Rulescan be setup as scheduled, recurring, or for example, triggered by motion detection.2. Select the Condition that must be met to trigger the action. If you specify more than one condition for the rule, all of theconditions must be met to trigger the action.3. Select which Action the camera should perform when the conditions are met.NoteIf you make changes to an active rule, then the rule needs to be restarted for the changes to take effect.Record video when the camera detects motionThis example explains how to set up the camera to start recording to the SD card five seconds before it detects motion and tostop one minute after.Make sure the AXIS Video Motion Detection application is running:1. Go to Settings > Apps > AXIS Video Motion Detection.2. Start the application if it is not already running.3. Make sure you have set up the application according to your needs.Create a rule:1. Go to Settings > System > Events and add a rule.2. Type a name for the rule.3. In the list of conditions, under Application, select AXIS Video Motion Detection (VMD).4. In the list of actions, under Recordings, select Record video while the rule is active.5. Select an existing stream profile or create a new one.6. Set the prebuffer time to 5 seconds.7. Set the postbuffer time to 60 seconds.8. In the list of storage options, select SD card.9. Click Save.ApplicationsApplicationsAXIS Camera Application Platform (ACAP) is an open platform that enables third parties to develop analytics and other applicationsfor Axis products. To find out more about available applications, downloads, trials and licenses, go to axis.com/applicationsTo find the user manuals for Axis applications, go to axis.com12