Axis M3064-V User Manual

Also see for M30 Series: User manual Installation guide User manual Installation guide User manual

AXIS M30 Network Camera SeriesAdditional settingsNoteWhen you reduce the max gain, the image can become darker.• Set the max gain to a lower value.• Open the aperture.Reduce motion blur in low-light conditionsTo reduce motion blur in low-light conditions, adjust one or more of the following settings in Settings > Image > Exposure:• Move the Blur-noise trade-off slider toward Low motion blur.NoteWhen you increase the gain, image noise also increases.• Set Max shutter to a shorter time, and Max gain to a higher value.If you still have problems with motion blur:• Increase the light level in the scene.• Mount the camera so that objects move toward it or away from it rather than sideways.Maximize details in an imageImportantIf you maximize details in an image, the bitrate will probably increase and you might get a reduced frame rate.• Make sure to select the capture mode that has the highest resolution.• Set the compression as low as possible.• Select MJPEG streaming.• Turn off Zipstream functionality.Handle scenes with strong backlightDynamic range is the difference in light levels in an image. In some cases the difference between the darkest and the brightestareas can be significant. The result is often an image where either the dark or the bright areas are visible. Wide dynamic range(WDR) makes both dark and bright areas of the image visible.Image without WDR.8