Axis M3203-V User Manual

Also see for M3203-V: Installation guide User manual User manual Installation guide

AXIS M3203-V Network CameraAccessing the ProductPTZ ControlsThe Live View page also displays Pan/Tilt/Zoom (PTZ) controls. The administrator can enable/disable controls for specified users underSystem Options > Security > Users.NoteThese controls are available if digital PTZ is enabled in the selected view area, see View Area on page 17.Click the Emulate joystick mode button and click in the image to move the camera view in the direction of themouse pointer.Click the Center mode button and click in the image to center the camera view on that position. The center modebutton could also be used to zoom in on a specific area. Click in the image and drag to draw a rectangle surroundingthe area to be magnified. To zoom out, rotate the mouse wheel.Click the Ctrl panel button to open the PTZ control panel which provides additional PTZ controls.User-defined buttons can also appear in the Control panel. See Controls on page 24.Select a PTZ preset position to steer the camera view to the saved position. See Preset Positionson page 23.Pan and Tilt bars – Use the arrows to pan and tilt the camera view, or click on aposition on the bar to steer the camera view to that position.The PTZ controls can be disabled under PTZ > Advanced > Controls, see Controls on page 24.10