Axis M3203-V User Manual

Also see for M3203-V: Installation guide User manual User manual Installation guide

AXIS M3203-V Network CameraAccessing the ProductControls on the Live View PageSelect a stream profile for the Live View page from the Stream Profile drop-down list. Forinformation about how to configure stream profiles, see page 16.The Manual Trigger button is used to trigger an action rule from the Live View page. Forinformation about how to configure and enable the button, see Manual Trigger on page 9 .Click Snapshot to save a snapshot of the video image. This button is primarily intendedfor use when the AXIS Media Control viewer toolbar is not available. Enable this buttonfrom Live View Config > Action Buttons.Manual TriggerThe Manual Trigger is used to trigger an action rule from the Live View page. The manual trigger can for example be used tovalidate actions during product installation and configuration.To configure the manual trigger:1. Go to Setup > Events.2. Click Add to add a new action rule.3. From the Trigger drop-down list, select Input Signal.4. From the second drop-down list, select Manual Trigger.5. Select the desired action and configure the other settings as required.For more information about action rules, see Events on page 30.To show the manual trigger buttons in the Live View page:1. Go to Setup > Live View Config.2. Under Action Buttons, select Show manual trigger button.AXIS Media Control viewer toolbarThe AXIS Media Control viewer toolbar is available in Internet Explorer only. See AXIS Media Control (AMC) on page 11 for moreinformation. The toolbar displays the following buttons:The Play button connects to the Axis product and starts playing a media stream.The Stop button stops the media stream.The Snapshot button takes a snapshot of the video image. The location where the image is saved can be specifiedin the AMC Control Panel.Click the View Full Screen button and the video image will fill the entire screen. Press ESC (Escape) on the computerkeyboard to cancel full screen view.The Record button is used to record the current video stream. The location where the recording is saved can be specified inthe AMC Control Panel. Enable this button from Live View Config > Viewer Settings.9