Axis MFD-R Installation Manual

Also see for AXIS 209FD: Installation guide Specifications Product guide User manual Datasheet

Contents

Axis MFD-R Installation Manual Manual pdf 12 page image

Page 12 AXIS 209FD/FD-R/FD-R M12/MFD/MFD-R/MFD-R M12 Installation GuideComplete the installation1. Clean the dome with a dry soft cloth to remove dust and fingerprints and use a blower toremove any dust from the lens.2. To absorb any moisture in theAXIS 209FD-R/AXIS 209FD-RM12/AXIS 209MFD-R/AXIS209MFD-R M12, remove thesupplied silica gel sachet (drybag) from the plastic bag andaffix inside the cover, behindthe dome.3. You can replace the cover ineither of these two ways:• Replace cover and gentlytighten the tamper-proofscrews by hand usingthe supplied allen key. Inthe AXIS 209FD-R/AXIS 209FD-R M12/AXIS 209MFD-R/AXIS 209MFD-R M12,take care not to pinch the gasket.• Replace cover and tighten the tamper-proof screws with torque screwdriver(torque<0.4 Nm).The installation is now complete.Accessing the AXIS 209FD/FD-R/FD-R M12/MFD/MFD-R/MFD-R M12 from the InternetOnce installed, your AXIS 209FD/FD-R/FD-R M12/MFD/MFD-R/MFD-R M12 is accessible onyour local network (LAN). To access the camera from the Internet, network routers must beconfigured to allow incoming traffic, which is usually done on a specific port. Please refer tothe documentation for your router for further instructions. For more information on this andother topics, visit the Axis Support Web at www.axis.com/techsupAffix dry bag here.