AXIS 209FD/FD-R/FD-R M12/MFD/MFD-R/MFD-R M12 Installation Guide Page 15ENGLISHENGLISHResetting to the Factory Default SettingsThis will reset all parameters, including the IP address, to the Factory Default settings:1. Disconnect the network cable from the camera.2. Using the supplied allen/hex key, loosen the 4 screws holding the cover and remove it.3. Press and hold the Control button and reconnect the network cable.4. Keep the Control button pressed until the Status indicator displays amber (this may takeup to 15 seconds).5. Release the Control button. When the Status indicator displays green (which can take upto 1 minute) the process is complete and the camera has been reset.6. Re-assign the IP address, using one of the methods described in this document.It is also possible to reset parameters to the original factory default settings via the webinterface. For more information, please see the online help or the user’s manual.Further informationThe user’s manual is available from the Axis Web site at www.axis.com or from the AxisNetwork Video Product CD supplied with this product.Tip!Visit www.axis.com/techsup to check if there is updated firmware available for yourAXIS 209FD/FD-R/FD-R M12/MFD/MFD-R/MFD-R M12. To see the currentlyinstalled firmware version, see the Basic Configuration web page in the product’sSetup tools.