Axis P1343-E Installation Manual

Also see for P1347-E: Datasheet Installation guide User manual User manual

Contents

ENGLISHSafeguardsPlease read through this Installation Guide carefully before installing the product. Keep the Installation Guidefor further reference.CAUTION!• Store the Axis product in a dry and ventilated environment.• Avoid exposing the Axis product to vibration, shocks or heavy pressure and do not install the camera onunstable brackets, unstable or vibrating surfaces or walls, since this could cause damage to the product.• Only use handtools when installing the Axis product, the use of electrical tools or excessive force couldcause damage to the product.• Do not use chemicals, caustic agents, or aerosol cleaners. Use a damp cloth for cleaning.• Only use accessories and spare parts provided or recommended by Axis.• Do not attempt to repair the product by yourself, contact Axis or your Axis reseller for service matters.IMPORTANT!• This Axis product must be used in compliance with local laws and regulations.Battery replacementThis Axis product uses a 3.0V CR2032 Lithium battery as the power supply for its internal real-time clock (RTC).Under normal conditions this battery will last for a minimum of 5 years. Low battery power affects theoperation of the RTC, causing it to reset at every power-up. A log message will appear when the battery needsreplacing. The battery should not be replaced unless required!If the battery does need replacing, please contact www.axis.com/techsup for assistance.• Danger of Explosion if battery is incorrectly replaced.• Replace only with the same or equivalent battery, as recommended by the manufacturer.• Dispose of used batteries according to the manufacturer's instructions.