Axis P1354-E Installation Manual

Also see for AXIS P1354-E: User manual Installation guide Installation guide User manual

Contents

AXIS P13-E SeriesConnection DiagramsI/O Connector12341 0 V DC (-)2 DC output 3.3 V, max 50 mA3 Digital input 0 to max 40 V DC4 Digital output 0 to max 40 V DC, open drain, 100 mAInstall the HardwareInstall the Wall BracketNONONOTICETICETICE• The weight of the camera is 3000 g (6.6 lb). Check that the material is strong enough tosupport this weight.• Always use a shielded network cable (STP) intended for outdoor use between theAxis product and the end point and ensure that the end point is properly grounded.Installations of Axis products using a shielded network cable (STP) and a properlygrounded end point have been tested to comply with industry immunity standard levelssuch as surge protection. Any other installation method will void the warranty andleave the unit at a risk.18