Axis P1354-E Installation Manual

Also see for AXIS P1354-E: User manual Installation guide Installation guide User manual

Contents

Legal ConsiderationsVideo and audio surveillance can be regulated by laws thatvary from country to country. Check the laws in your localregion before using this product for surveillance purposes.This product includes one (1) H.264 decoder license andone (1) AAC decoder license. To purchase further licenses,contact your reseller.LiabilityEvery care has been taken in the preparation of thisdocument. Please inform your local Axis office of anyinaccuracies or omissions. Axis Communications AB cannotbe held responsible for any technical or typographical errorsand reserves the right to make changes to the product andmanuals without prior notice. Axis Communications ABmakes no warranty of any kind with regard to the materialcontained within this document, including, but not limitedto, the implied warranties of merchantability and fitness fora particular purpose. Axis Communications AB shall notbe liable nor responsible for incidental or consequentialdamages in connection with the furnishing, performanceor use of this material. This product is only to be used forits intended purpose.Intellectual Property RightsAxis AB has intellectual property rights relating totechnology embodied in the product described in thisdocument. In particular, and without limitation, theseintellectual property rights may include one or more ofthe patents listed at www.axis.com/patent.htm and one ormore additional patents or pending patent applications inthe US and other countries.This product contains licensed third-party software. Seethe menu item “About” in the product’s user interface formore information.ThisproductcontainssourcecodecopyrightAppleComputer,Inc., under the terms of Apple Public Source License 2.0(see www.opensource.apple.com/apsl). The source code isavailable from https://developer.apple.com/bonjour/Equipment ModificationsThis equipment must be installed and used instrict accordance with the instructions given in theuser documentation. This equipment contains nouser-serviceable components. Unauthorized equipmentchanges or modifications will invalidate all applicableregulatory certifications and approvals.Trademark AcknowledgmentsAXIS COMMUNICATIONS, AXIS, ETRAX, ARTPEC and VAPIXare registered trademarks or trademark applications of AxisAB in various jurisdictions. All other company names andproducts are trademarks or registered trademarks of theirrespective companies.Apple, Boa, Apache, Bonjour, Ethernet, Internet Explorer,Linux, Microsoft, Mozilla, Real, SMPTE, QuickTime, UNIX,Windows, Windows Vista and WWW are registeredtrademarks of the respective holders. Java and allJava-based trademarks and logos are trademarks orregistered trademarks of Oracle and/or its affiliates.UPnPTM is a certification mark of the UPnPTM ImplementersCorporation.SD, SDHC and SDXC are trademarks or registered trademarksof SD-3C, LLC in the United States, other countries or both.Also, miniSD, microSD, miniSDHC, microSDHC, microSDXCare all trademarks or registered trademarks of SD-3C, LLCin the United States, other countries or both.Regulatory InformationEuropeThis product complies with the applicable CE markingdirectives and harmonized standards:• Electromagnetic Compatibility (EMC) Directive2004/108/EC. See Electromagnetic Compatibility (EMC)on page 2.• Low Voltage (LVD) Directive 2006/95/EC. See Safetyon page 3.• Restrictions of Hazardous Substances (RoHS) Directive2011/65/EU. See Disposal and Recycling on page 3.A copy of the original declaration of conformity may beobtained from Axis Communications AB. See ContactInformation on page 3.Electromagnetic Compatibility (EMC)This equipment has been designed and tested to fulfillapplicable standards for:• Radio frequency emission when installed according tothe instructions and used in its intended environment.• Immunity to electrical and electromagnetic phenomenawhen installed according to the instructions and usedin its intended environment.USAThis equipment has been tested using a shielded networkcable (STP) and found to comply with the limits for aClass B digital device, pursuant to part 15 of the FCCRules. These limits are designed to provide reasonableprotection against harmful interference in a residentialinstallation. This equipment generates, uses and canradiate radio frequency energy and, if not installed andused in accordance with the instructions, may causeharmful interference to radio communications. However,there is no guarantee that interference will not occur ina particular installation. If this equipment does causeharmful interference to radio or television reception, whichcan be determined by turning the equipment off and on,the user is encouraged to try to correct the interference byone or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment andreceiver.• Connect the equipment into an outlet on a circuitdifferent from that to which the receiver is connected.• Consult the dealer or an experienced radio/TVtechnician for help.The product shall be connected using a shielded networkcable (STP) that is properly grounded.CanadaThis digital apparatus complies with CAN ICES-3 (Class B).The product shall be connected using a shielded networkcable (STP) that is properly grounded.Cet appareil numérique est conforme à la normeCAN NMB-3 (classe B). Le produit doit être connecté àl'aide d'un câble réseau blindé (STP) qui est correctementmis à la terre.EuropeThis digital equipment fulfills the requirements for RFemission according to the Class B limit of EN 55022. Theproduct shall be connected using a shielded network cable(STP) that is properly grounded.This product fulfills the requirements for immunityaccording to EN 61000-6-1 residential, commercial andlight-industrial environments.This product fulfills the requirements for immunityaccording to EN 61000-6-2 industrial environments.