Axis P1365 Installation Manual

Also see for P1365: Installation guide User manual Installation guide

AXIS P1365 Network CameraSafety InstructionsNONONOTICETICETICE• The Axis product shall be used in compliance with local laws and regulations.• To use the Axis product outdoors, or in similar environments, it shall be installed in anapproved outdoor housing.• Store the Axis product in a dry and ventilated environment.• Avoid exposing the Axis product to shocks or heavy pressure.• Do not install the product on unstable brackets, surfaces or walls.• Use only applicable tools when installing the Axis product. Using excessive force withpower tools could cause damage to the product.• Do not use chemicals, caustic agents, or aerosol cleaners.• Use a clean cloth dampened with pure water for cleaning.• Use only accessories that comply with technical specification of the product. These can beprovided by Axis or a third party.• Use only spare parts provided by or recommended by Axis.• Do not attempt to repair the product by yourself. Contact Axis support or your Axisreseller for service matters.TransportationNONONOTICETICETICE• When transporting the Axis product, use the original packaging or equivalent to preventdamage to the product.BatteryThe Axis product uses a 3.0 V BR/CR2032 lithium battery as the power supply for its internalreal-time clock (RTC). Under normal conditions this battery will last for a minimum of five years.Low battery power affects the operation of the RTC, causing it to reset at every power-up. Whenthe battery needs replacing, a log message will appear in the product’s server report. For moreinformation about the server report, see the product´s setup pages or contact Axis support.The battery should not be replaced unless required, but if the battery does need replacing, contactAxis support at www.axis.com/techsup for assistance.6