Axis P3346-VE User Manual

Also see for P3346-VE: User manual Installation guide Installation guide Installation guide Installation guide

AXIS P3346-VE Fixed Dome Network CameraSystem OptionsNoteTo prevent corruption of recordings, the SD card should always be unmounted before it is ejected.If the card’s status shows as failed, click Check disk to see if the problem can be found and then try Repair.To avoid filling the card, it is recommended to remove recordings continuously. Under Recording Settings, select Remove recordingsolder than and select the number of days or weeks.To stop writing to the share and protect recordings from being removed, select Lock under Recording Settings.For more information, see the online help .Network ShareNetwork share allows you to add network storage such as a NAS (Network Attached Storage) or any server that uses CIFS (CommonInternet File System) and use them for storage of recordings.To add a network share:1. Go to System Options > Storage.2. Click Network Share.3. Enter the IP address, DNS or Bonjour name to the host server in the Host field.4. Enter the name of the share in the Share field.5. If required, select The share requires login and enter the user name and password.6. Click Connect.To clear all recordings and data from the Axis product’s folder on the designated share, click Clear under Storage Tools.To avoid filling the share, it is recommended to remove recordings continuously. Under Recording Settings, select Remove recordingsolder than and select the number of days or weeks.To stop writing to the share and protect recordings from being removed, select Lock under Recording Settings.Ports & DevicesI/O PortsThe Axis product provides one input port and one output port for connection of external devices. For information on how toconnect external devices, see Connectors, on page 6 .The I/O ports are configured under System Options > Ports & Devices > I/O Ports. The ports can be given descriptive names and theirNormal states can be configured as Open circuit or Grounded circuit.Port StatusThe list on the System Options > Ports & Devices > Port Status page shows the status of the product’s input and output ports.MaintenanceThe Axis product provides several maintenance functions. These are available under System Options > Maintenance.Click Restart to perform a correct restart if the Axis product is not behaving as expected. This will not affect any of the currentsettings.Click Restore to reset most settings to the factory default values. The following settings are not affected:47