Axis P5512 User Manual

Also see for P5512: Datasheet User manual User manual Installation guide Installation guide

AXIS P5512–E PTZ Dome Network CameraEvents4. Set the Activation Time parameters (24h clock) for the event. For example, select Recurrence pattern and let the eventstart on Sundays at 13.00 with a duration of 12 hours.5. Set the When Activated parameters, that is, define what the product should do when the event is activated. To uploadimages, select Save stream and enter the required information. See Save stream.6. Click OK to save the event.Save streamTo upload images to an FTP or HTTP server, save the video stream to the SD card or send images by email, check the Save stream box.Pre-trigger and post-trigger buffers are useful when checking to see what happened immediately before and after a trigger. Alluploaded images are JPEG images.Image frequency - Set the image frequency to a desired frame rate. The frame rate will be the best possible, but might not be ashigh as specified, especially if uploading via a slow connection.Include pre-trigger buffer - Images stored internally in the product from the time immediately preceding the trigger. Check the boxto enable the pre-trigger buffer and specify the buffer length in seconds, minutes or hours.Include post-trigger buffer - Images stored internally in the product from the time immediately after the trigger. Check the box toenable the post-trigger buffer and specify the buffer length in seconds, minutes or hours.Note• Pre-trigger and post-trigger buffers will be lost if the connection to the event server fails.• The maximum length of the pre-/post-trigger buffer depends on the video image size and selected frame rate.• If the pre- or post-buffer is too large for the product’s internal memory, the frame rate is reduced and individual imagesmay be missing. If this occurs, an entry is created in the product’s log file.Continue image upload (unbuffered) - Upload video images for a fixed length of time or for as long as the trigger is active.Select type - Upload images to an FTP or HTTP server, send images by email or save the video stream to the SD card.Create folder - Images uploaded to FTP and HTTP servers can be saved to designated folders. Folders can, for example, be namedusing the current date and time, see File Naming & Date/Time Formats in the online help.Base file name - Used to name all uploaded images. Add a suffix or use your own file format to give the images unique names, seeFile Naming & Date/Time Formats in the online help.Use stream profile - Select the stream profile to upload, send as email or save to the SD card. When saving to the SD card, the videoformat must first be selected. For information on stream profiles, see Stream Profiles, on page 15.GatekeeperThe Gatekeeper monitors an area such as an entrance gate. It can pan, tilt and zoom in, and take a snapshot of, for example, aface, triggered by movement in the area. The camera will then automatically return to the home position and continue to overviewthe monitored area.To configure the Gatekeeper, follow the online instructions under Events > Gatekeeper.Motion detectionMotion detection is used to generate an alarm whenever movement occurs (or stops) in the view. Up to 10 Include and Excludewindows can be configured:• Include windows — target specific areas within the whole video image26