Axis P5532–E PTZ User Manual

Also see for P5532-E: Preventive Maintenance Instructions and Checklist User manual Installation guide Installation guide User manual

AXIS P5532–E PTZ Dome Network CameraAccessing the productAXIS Media Control viewer toolbarThe AXIS Media Control viewer toolbar is available in Internet Explorer only. See AXIS Media Control (AMC), on page 11 for moreinformation. The toolbar displays the following buttons:The Play button connects to the Axis product and starts playing a media stream.The Stop button stops the media stream.The Snapshot button takes a snapshot of the video image. The location where the image is saved can be specifiedin the AMC Control Panel.Click the View Full Screen button and the video image will fill the entire screen. Press ESC (Escape) on the computerkeyboard to cancel full screen view.The Record button is used to record the current video stream. The location where the recording is saved can be specifiedin the AMC Control Panel.PTZ ControlsThe Live View page also displays Pan/Tilt/Zoom (PTZ) controls. The administrator can enable/disable controls for specified users underSystem Options > Security > Users.With the PTZ Control Queue enabled the time each user is in control of the PTZ settings is limited. Click the buttons to request orrelease control of the PTZ controls. The PTZ Control Queue is set up under PTZ > Control Queue.Click the Emulate joystick mode button and click in the image to move the camera view in the direction of themouse pointer.Click the Center mode button and click in the image to center the camera view on that position. The center modebutton could also be used to zoom in on a specific area. Click in the image and drag to draw a rectangle surroundingthe area to be magnified. To zoom out, rotate the mouse wheel.Click the Ctrl panel button to open the PTZ control panel which provides additional PTZ controls.User-defined buttons can also appear in the Control panel. See Controls, on page 23.Select a PTZ preset position to steer the camera view to the saved position. See Preset Positions,on page 21.Pan and Tilt bars – Use the arrows to pan and tilt the camera view, or click on a position on the bar to steer thecamera view to that position.Zoom bar – Use the arrows to zoom in and out, or click on a position on the bar to zoom to that position.Focus bar – Use the arrows to focus the camera, or click on a position on the bar to set the focus position. Using thefocus bar will disable the product’s autofocus. To re-enable, use the PTZ control panel which is opened by clickingthe Ctrl panel button (see above).Iris bar – Click on a position on the iris bar to change the degree to which the iris is opened. This will disable theproduct’s auto iris. To re-enable, use the PTZ control panel which is opened by clicking the Ctrl panel button (see above).9