Axis P5532 User Manual

Also see for AXIS P5532 PTZ: User manual Datasheet

25AXIS P5532/AXIS P5534 - EventsEventsPre-defined parameters, known as an event or Event Type can trigger certain actions in the camera. A common event type isan alarm that causes the camera to upload images. Many event types use an Event Server, to receive uploaded images.An event that is triggered by a signal, such as a door switch, motion detection, or system event, is called a triggered event, seepage 26.A scheduled event runs at pre-programmed times.An Action refers to what happens when the event occurs.This section describes how to configure the camera to perform certain actions when events occur.Event ServersEvent Servers are used to receive uploaded image files and/or notification messages. To set up Event Server connections inyour camera, go to Setup > Events > Event Servers and enter the required information for the required server type.For details on each setting, see the online help available from each web page.When the setup is complete, the connection can be tested by clicking the Test button (the connection test takesapproximately 10 seconds).Event TypesAn Event Type describes how and when the camera performs certain actions.Example: If somebody passes in front of the camera and an event has been configured to detect and respond to motion,the camera can record and saves images to an FTP server, and can send a notification e-mail to an e-mail address. Imagescan be sent as e-mail attachments.Server type Purpose Information requiredFTP Server• Receives uploaded images • Descriptive name• Network address and Upload path• User name and passwordHTTP Server• Receives notification messages• Receives uploaded images• Descriptive name• URL (IP address or host name)• User name and password• Proxy settingsTCP Server• Receives notification messages • Descriptive name• Network address (IP address or host name)• Port number