Axis Q1931–E User Manual

Also see for Q1931-E: Installation guide Installation guide User manual

AXIS Q1931–E PT Mount Thermal Network CameraDetectorsDetectorsShock DetectionEnable Shock Detection from the Detectors menu. Shock detection is used, for example, to generate an alarm if the product is hitby an object.Use the Shock sensitivity slider to adjust the sensitivity level at which the product should send an alarm upon being hit. Lowsensitivity value implies that the product will generate an alarm only if the hit is powerful.Motion DetectionMotion detection is used to generate an alarm whenever movement starts or stops in the camera view.Motion detection is configured by defining up to 10 Include and Exclude windows:• Include windows — define areas where motion should be detected• Exclude windows — define areas within an Include window that should be ignored (areas outside Include windowsare automatically ignored).For instructions, see Set Up Motion Detection Windows on page 25.To control the number of motion detection alarms, the parameters Object Size, History and Sensitivity can be adjusted. SeeMotion Detection Parameters on page 25.Once motion detection windows are configured, the Axis product can be configured to perform actions when motion is detected.Possible actions include uploading images and start recording. For more information, see Setting Up an Action Rule on page 31.Note• Using the motion detection feature may decrease the product’s overall performance.• The position of the Motion Detection Window is relative to the orientation of the Camera. Changing the orientation of thecamera will also change the position of the Motion Detection Window.Set Up Motion Detection WindowsTo set up a motion detection Include Window, follow these instructions:1. Go to Detectors > Motion Detection.2. Select the Configure Included Windows option and click New. Select the new window in the list of windows andenter a descriptive name.3. Adjust the size (drag the bottom right-hand corner) and the position (click on the text at the top and drag to the desiredposition) of the window.4. Adjust the Object Size, History and Sensitivity profile sliders (see Motion Detection Parameters for details). Any detectedmotion within an active window is indicated by red peaks in the Activity window.5. Click Save.To exclude parts of the include window, select the Configure Excluded Windows and position the exclude window within theinclude window.To delete an include or exclude window, select the window in the list of windows and click Del.Motion Detection ParametersThe parameters controlling motion detection are described in the table below:25