Axis Q6032 Install Manual

Also see for Q6032: Installation guide User manual Installation guide Installation guide

Installing Camera Bracket into D2Axis Q6032,Q6034, & Q6035Required components:(1) Dotworkz Universal camera bracket(1) Axis Hard Ceiling Bracket(3) # 6 machine screws, hex nuts, & washers(4) #8-32 x ½” long Pan head machines screws -Phillips3. The Axis Q60 Series cameras do not need anystandoffs. The Dotworkz Camera mount bracketwill mount directly to upper mount inserts.4. Insert the camera bracket with the hardceiling bracket onto it into place. Line upwith 4 screw posts with bracket cornermounting slots/ holes.Again, make sure the camerabracket is facing the right direction.Picture represents camera bracket orientation & how it issecured. Don’t’ forget to mount your camera to the D2camera bracket based on instructions.Only Non -E versions willfit in Dotworkz D-Series5. Use (4) #8-32 x ½” long screws (Phillipshead) to secure the bracket into place, thatare provide in Dotworkz hardware pack.Axis Hard Ceiling Bracket ringprovided by Axis in all Q60indoor Series camera systemsThis edge nests in arch at front of D2This edge of the bracket faces backof the D26. Install Wiring on rear of camera beforetwist locking camera onto the key lock onhard ceiling bracket.**Skip to next page for wiring details**7. Remove Axis Q60 Lens Bubble for bestoptics with Bubble mount ring. Dotworkz D2Lens bubble will protect camera & housing.9. Tape tamper switch down built into AxisQ60 camera housing mouth to enablecamera.1. Install the Axis P55 Hard Ceiling Bracket ringonto the D2 Camera Bracket using (3) #6machine screws, (3) .25" Lock Washer, and (3).25" Washer that are included.2. Align holes as indicated on image below forquick and precise alignment of Axis bracketonto center of Dotworkz camera bracket.* Axis Q60 (non -E) ready for PoE+ powering.* Dotworkz KT-AXPH is a power harness kit made forAxis Q60 & P55 series, allowing these indoor models tobe powered by 24 VAC, or 24 VDC.* Axis has a Multi-harness version for these series.8. Twist Lock Axis housing onto pre-installedhard ceiling bracket using clockwise motion.Assure it is securely fastened.

/ 2

Related manuals for Axis Q6032