Axis QIG5800 Quick Start Manual

Also see for 5800: Specification User manual Quick installation guide

Contents

Axis QIG5800 Quick Start Manual Manual pdf 2 page image

2Step1Connect the Hardware1. Make sure that the printer is switched off and that the power supply is disconnected fromthe AXIS 5800 Mobile.2. Locate the serial number, found on the underside label of the AXIS 5800 Mobile, and writeit down. You can use this number to set the IP-address of the print server. Example: Ser.No. 00408C1802FB3. Connect your printer(s) to the print server’s LPT1 or LPT2 port using a printer cable. Makesure the Bluetooth antenna is pointing towards the ceiling.4. Connect your AXIS 5800 Mobile to your network (Ethernet Connector), using a twisted paircategory 5 cable5. Switch on your printer(s) and make sure the printer is ready for use.6. Connect the power supply to the Power Supply Connnector. The Network Indicator willstart flashing when the print server is correctly connected to the network.7. Wait 1 minute and press the test button once. A test page will be printed on the connectedprinter, keep it handy during the installation. The test page will show the IP address of theprint server.LPT1LPT2 Power Supply ConnectorTest ButtonBluetoothAntennaNetwork IndicatorPower IndicatorEthernet(10 base &100 base TX)Connector