Axis QIG5800 Quick Start Manual

Also see for 5800: Specification User manual Quick installation guide

Contents

Axis QIG5800 Quick Start Manual Manual pdf 3 page image

3Step2Check if the Print Server’s IP Address was Set Automatically If you are working in a network that uses dynamic IP address assignment (e.g. DHCP,BOOTP, RARP or Auto-IP), your print server will obtain an IP address automatically whenyou connect it to the network. Follow the instructions on this page to verify the IP address. If you are working in a network that does not use dynamic IP address assignment, go toStep 3 to assign an IP address to the print server manually.Follow these instructions to verify that your print server has obtained an IP addressautomatically:1. Open a Web browser.2. In the Web browser’s Location/Address field, enter the print server’s IP address (Internetaddress), found on the test page printed in Step 1, and press Enter.3. If the Network Print Server (Printer Overview) page appears in your Web browser, the IPaddress was set automatically when you connected the AXIS 5800 Mobile to your network.Skip to Step 4 Configure a Printer, on page 7.Network Print Server (Printer Overview) page4. If the Network Print Server (Printer Overview) page does not appear, you need to set theprint server’s IP address manually using one of the methods described in Step 3.Notes: It is important that you use a Web browser with JavaScript support! If you are working in a WINS/DDNS network, you can log in to the print server’s web pagesusing its default host name: In the Web browser’s Location/Address field, enter the defaultprint server name AXIS where are the last six digits of the serialnumber, found on the print server’s underside label. Example: If the serial number of yourprint server is 00408C1802FB, type: AXIS1802FB and press Enter. See the AXIS 5800 Mobile User’s Manual for installation instructions in a NetBIOS/NetBEUIenvironment. The User’s Manual is located on the AXIS Product CD and on www.axis.com