Axis S P13-E Installation Manual

Also see for AXIS P1353-E: User manual Installation guide User manual

AXIS P13-E Network Camera SeriesNoteThe I/O connector is connected to the housing (fan/heater) on delivery. In the case of a fanor heater error, an input signal will be triggered in the camera. Set up an action rule in thecamera to configure which action the signal shall trigger. For information about events andaction rules, see the User Manual available on www.axis.comAudio ConnectorThe Axis product has the following audio connectors:• Audio in (pink) – 3.5 mm input for a mono microphone, or a line-in mono signal.• Audio out (green) – 3.5 mm output for audio (line level) that can be connected toa public address (PA) system or an active speaker with a built-in amplifier. A stereoconnector must be used for audio out.For audio in, the left channel is used from a stereo signal.RS485/RS422 ConnectorTwo terminal blocks for RS485/RS422 serial interface used to control auxiliary equipment suchas PTZ devices.SD Card SlotA microSD card (not included) can be used for local recording with removable storage. For moreinformation, see Specifications on page 15.NONONOTICETICETICETo prevent corruption of recordings, the SD card should be unmounted before removal. Tounmount, go to Setup > System Options > Storage > SD Card and click Unmount.NoteFor SD card recommendations see www.axis.comControl ButtonThe control button is used for:• Enabling the Focus Assistant. Press and very quickly release the Control button.• Resetting the product to factory default settings. See page 21.• Connecting to an AXIS Video Hosting System service or AXIS Internet Dynamic DNSService. For more information about these services, see the User Manual.14