Axis T8123-E Installation Manual
Also see for T8123-E Midspan 1-p: Installation guideUser guide
                                            | |
AXIS T8123-E/T8124-E Installation Guide Page 7ENGLISH3. Thread male plug waterproof connector cover (A,B and C) on to the Ethernet cable. See Fig 3.4. Attach the Ethernet cable to DATA IN. See Fig 2.5. Thread plug (A) over the RJ45 male plug, connected to DATA IN. See Fig 3.6. Thread housing (B) over the plug and screw (hand tight only). See Fig 3.7. Thread cover (C) over the connector and screw (hand tight only). See Fig 3.8. Repeat steps 2 to 6 for DATA PWR OUT.9. Connect AXIS T8123-E/T8124-E to an AC power line (100-240 V AC) complying with theinformation in the Safeguards.International version only. See Fig 4.Note: Do not use cross over cable between AXIS T8123-E/T8124-E output port and load device.DATA IN DATA PWR OUTLINE ACLNNPELPEFig 2Fig 3RJ45male plugAB CRJ45 male plugwaterproofconnectorcoverFig 4INCOMINGMAINS VOLTAGEEXTERNAL PROTECTIVEGROUND WIRE |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine