Axis T8705 User Manual

Also see for T8705: Installation guide Integration guide User manual

Contents

AXIS T8705 Video DecoderSetupSetupAbout the product's built-in helpYou can access the built-in help through your product’s web page. The help provides more detailed information on the product’sfeatures and their settings.There are two help features in the user interface:• To get general information about the controls on each page, click in the bottom right corner of the browser window.• To get detailed information about an individual setting, click next to the setting.How to configure a monitor1. Go to Display.2. Select one of these options under Multi mode:- To show the video sources one at a time in sequence, select Sequencer, and set the interval that each sourceis displayed.- To show multiple video sources at the same time, select Multiview, and select a layout.3. Under Video output, select a resolution and refresh rate that works with your display. See the documentation for yourdisplay.How to add Axis camerasNoteThe camera wizard only works with Axis cameras. Add cameras from other brands one at a time. See How to add a singlecamera on page 6 .1. Go to Video sources.2. Click Camera wizard.The wizard searches the network for Axis cameras.3. When you open the camera wizard, the Add credentials window opens automatically. If you don’t want to add anycredentials, close the window.4. Select the cameras to add and click Connect.The decoder will try to access the camera with all saved credentials. See How to add usernames and passwords forcameras on page 7 .5. To access more settings for the cameras, see Advanced camera settings on page 7 .How to add a single camera1. Go to Video sources.2. Click Add camera.- For an Axis camera: Enter a name and IP address for the camera.6