Azbox SD99010A User Manual
                                              | |
3． Connecting Your SystemThere are four ways to connect the receiver to your existing TV system. We recommend using one of thefollowing cases for the best result:1. If you have a high definition television set, you should use a HDMI cable for best result. Plug oneend of the cable into the HDMI socket on the receiver and the other end into the matching socketon your television. In this case, you do not have to make audio connections because the HDMIconnector can output stereo audio or Dolby digital audio.2. Connect one end of RCA cable to the RCA jack on the back of the receiver and the other end to aRCA jack on your TV.Finally connect the coaxial cable from the LNB to the Input on the receiver.Notice: the Video can not be output simultaneously with RCA and HDMI interfaceTV with Motorized System (DiSEqC 1.2 / USALS)Connect one end of your coaxial cable to the LNB IN connector on the receiver and the other end to theReceiver connector on the DiSEqC 1.2 / USALS motor.Connect the coaxial cable from the LNB to the LNB connector on the DiSEqC 1.2 / USALS motor.All our receivers are designed to be DiSEqC 1.0 / DiSEqC 1.2 /USALS compatible.This allows multiple antennas to be connected to the receiver at the same time.If you have two or more fixed antennas or LNBs, we recommend you use a DiSEqC 1.0 switch. Connectthe coaxial cable from the first LNB to the LNB 1 or LNB A input connector of the DiSEqC switch. Do thesame for any other LNBs that you have.Connect one end of a coaxial cable to the RF output connector of the DiSEqC switch,Connect the other end to Input on the receiver.11 |
Related manuals for Azbox SD99010A
manualsdatabase
Your AI-powered manual search engine