Azbox SD99010A User Manual
                                              | |
key can enter satellite list for you to select directly.2 LNB Freq: In this item, press [Volume Up/ Volume Down] key can select the parameter. Option is5150/5750/5950/9750/10600/10700/10750/11300/5150-5750/Universal(9750-10600)/Universal(9750-107500)/and MDU3 DiSEqC1.0/1.1: You can use [Volume Up/ Volume Down] key to switch options. There are severaloptions for your selection: Disable / LNB1 / LNB2 / LNB3 / LNB44 22K: You can use [Volume Up/ Volume Down] key to switch “ON / Off”. When this item isswitched to “ON”, receiver will receive TV and radio input signal from 22K port. If the item isswitched to “Off”, the receiver will receive all signal from 0K port.! NoticeWhen you choose LNB type “Universal”, you can not modify 22K.5 Polarity: In “Polarity” item, [Volume Up/ Volume Down] key to switch “Auto/ H / V” functions.6 Motor：You can use [Volume Up/ Volume Down] key to set Antenna type by Motor7 Unicable：You can use [Volume Up/ Volume Down] key to set unicable enable or none6.1.3 Motor Antenna1 Motor Type: DiSEqC1.2/USALS2 Motor Setting:If you select “DiSEqC1.2”, “Local Longitude / LocalLatitude” is not available. It will show the screen likebelow:When the highlight on the mode item，You can use [Volume Up/ Volume Down] key to set Motor functionAutomatic SAT Scanyou can find sub-menus for Satellite, Transponder, Polarity, NIT, program ,Scan mode，scanselect，Signal Quality Bar and etc. and press GREEN key to start channel search1、 Satellite: Select the satellite what you want to search the channel2、 Transponder : Select the desired TP (transponder).3、 NIT：scan by nit search mode4、 Program：scan by all/free only5、 Scan mode：default、one Tp、blind scan6、 Scan select：single sat、all sat7、 Signal Intensive / Quality Bar : They show the strength and quality of signal from LNB.21 |
Related manuals for Azbox SD99010A
manualsdatabase
Your AI-powered manual search engine