B-ALU Extern 180 Instructions For Installation And Use Manual
                                                                                                                                                                                                        | |
Contents
| 
ENGLISH156. Environment, disassembly, storage and transport6.1. Environment-friendly disassemblyHave the product disposed of only by an authorized disposal company!It should be disassembled only by specialists.6.2. Storage and transportIf the product needs to be stored or transported, care must be taken to provide good quality packaging for this purpose. It must be stored ina dry environment.7. Programming instructions7.1. Quick commissioningThe gate system is supplied with the most important default factory settings and can be customized within a few minutes: Prior toprogramming, ensure that the mechanical stops for the opening and closing operations are present and have been adjusted. These havebeen pushed as transport locks for the assembly.ATTENTION: The shutdown mechanism for the force is out of operation during the learning procedure. Hence, ensure that there are nopersons or objects located in the hazard zone during the learning procedure. Make sure that no start or stop commands are issued andthat the photocell are not interrupted during operation.Appears:Default display with mains voltage presentSteady and continuous illumination: everything OKFlashing: FaultKeep the P2 „PROGR/OK“ button pressed for at least 4secondsPress the P2 „PROG/OK“ button 2 times. The gate opensup to the internal Stopp, checks this and then saves it.The gate closes automatically up to the internal stop,checks this one again and then saves it.INLINE 100INLINE 120 |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine