6.1 Transport• Transport the unit oriented properly to prevent damage.• Maximum stacking level of units for shipment – 3 Levels.• Do not stack additional items or shipments on top of units.• Protect from rain.• Mechanical shock must be avoided.• Storage and Transport temperature should not be less than 0 °C (32 °F) or more than 40 °C (104 °F)• Storage and Transport relative humidity maximum shall be less than 80%.• For dimensions and weight refer to Section 10.1.NOTEKeep the shipping packaging in case you need to ship the unit for technical assistance.6.2 Hardware Setup• The unit must be placed on a solid, rigid, level and skid-proof surface (laboratory desks, racks) sothat a horizontal, safe, vibration-free position is ensured. The unit must not be placed in directsunlight.• The unit shall be placed in a location that is dry and well ventilated. It shall not encounter liquid orfluid leaks.• The unit shall be installed in a low dust environment. When not in use, the containers shall beplaced properly in the base and the lid shall be secured.• The room temperature should not be less than 15 °C (59 °F) or more than 35 °C (97 °F). Thehumidity should be less than 80%.• The support surface shall be stationary (no castors) and must have a load bearing capacity of atleast 40 kg/88 lbs.CAUTION• Take care not to pinch your fingers when placing the unit on the table.• A footprint area (w x d: 750 x 750 mm, or 30” x 30”) is required.• The unit needs to be positioned on the support table in a manner that allows access to the mainssocket for disconnection from mains if needed.• Do not turn the unit on prior to temperature and humidity acclimatization.To properly set up the hardware, connect the B9Clean to an AC power socket (A) using ONLY the powersupply and cord provided with the B9Clean. Mains: 100-240 VAC, 50/60 Hz with protective earth. Connectto mains with protective earth in accordance with local power supply specifications.