BALAY 3VW300IA Instruction Manual

BALAY 3VW300IA Instruction Manual Manual pdf 24 page image

en24Electrical connection– Connect the appliance to an alternatingcurrent only, ranging from 220 V to240 V and 50 Hz or 60 Hz viaa correctly installed socket withprotective earth conductor. See ratingplate for required fusing 92.– The socket must be near the applianceand freely accessible followinginstallation.– The connection may be modified bytechnicians only.– A power cord extension may bepurchased from customer service only.– Use only a residual current operatedcircuit-breaker which features thesymbol ‚. Only this extensionguarantees compliance with thecurrently valid regulations.– The appliance features a waterdamage protection system. Pleasenote the system will not functionunless the power supply is connected.Removing the applianceAlso observe the sequence of workstepshere.– Disconnect the appliance from thepower supply.– Turn off the water supply.– Disconnect the waste water and freshwater connections.– Loosen the fastening screws under theworktop.– If fitted, remove the base panel.– Pull out the appliance, carefully pullingthe hose behind.TransportationEmpty the dishwasher and secure looseparts.Drain the appliance according to thefollowing steps:– Turn on the tap.– Close the door.– Switch on ON/OFF switch (.– Select programme with the highesttemperature.– Press START button @.Programme sequence starts.– After approx. 4 minutes press theSTART button @ until the Cleaningdisplay )* goes out.After approx. 1 min. the Enddisplay )"is lit.– Switch the appliance off ( and turnthe tap off.Transport appliance upright only.(This prevents residual water from runninginto the machine control and damagingthe programme sequence.)Protection against frostIf the appliance is in a room where there isa risk of frost (e.g. holiday home), emptythe appliance completely (seeTransportation).– Turn off the tap, disconnect supplyhose and drain water.