BEKA BA538C Manual

Contents

208.3.3 Alarm enable: ‘EnbL’This function allows the alarm to be enabled ordisabled without altering any of the alarmparameters. To check or change the functionselect 'EnbL' from the alarm menu and press Pwhich will reveal the current setting. The functioncan be changed by pressing the Up or Downbutton followed by the E button to return to thealarm menu.Note: The alarms will be automatically disabledafter the rate or total displays have beenrecalibrated, or the alarm type has been changed.Both alarms must therefore be enabled aftercalibration changes.8.3.4 Type of alarm: ‘tYPE’Alarm 1 and Alarm 2 may both be rate or totalalarms, or one may be conditioned for rate andthe other for total.To check or change the type of alarm, select'tYPE' from the alarm menu and press P which willreveal the current setting. The function can bechanged by pressing the Up or Down buttonfollowed by the E button to return to the alarmmenu.Note: When ‘tYPE’ is changed, the alarmparameters are automatically set to the defaultvalues and the alarm disabled. It must thereforebe reprogrammed before use.Fig 10 Alarm menu structure