2BEFORE YOU STARTIt is important to perform the upgrade according to the procedure described in the Installation Guide. The machinecan then be used as described in the Instruction and Reference Guide. The border embroidery frame (30 cm × 10cm (approx. 11-3/4 inches × 4 inches)) will show on the LCD screen of the machine and the frame will berecognized when attached to the embroidery frame holder. New machine features and benefits are described in thisguide.NEW FEATURES• A border embroidery frame (30 cm × 10 cm (approx. 11-3/4 inches × 4 inches)) is included, allowing thefabric to easily be rehooped when embroidering repeated patterns.• Instead of using a thread mark, the built-in camera can be used to connect embroidery patterns. (EmbroideryEdit)• Ten embroidery designs created to show the convenience and potential of the border embroidery frame areavailable on the included CD. To view a list of the patterns, refer to page 34.Note• Screen illustrations may vary due to model of machine.• Make sure that “Version 2” in the Settings screen has changed to “3.1” or later. If the machine is installed with a lowerversion, it must be upgraded. For details, refer to the Installation Guide.