Baby Lock Pearl BLQF Assembly Instructions Manual

Contents

27Step 15: Bungee Clamp AssemblyParts needed1- Frame Assembly4- Bungee Clamps QF09318-11015-1: Thread the bungee clamp cord from theinside of the frame through the bungee slot andthen pull the cord in a downward movement tolock the bungee clamp into place. (Fig. 15-1)15-2: Follow Step 14-1 for the remainingthree bungee clamps.Steps 15 & 16Bungee Clamp AssemblyHook & Loop Tape on Pole AssembliesFig. 15-1Step 16: Hook & Loop Tape on PoleAssembliesParts needed1-Frame Assembly1-Quilt Top Pole1-Backing Pole1-Take-up Pole3- Hook & Loop Tapes QF00665Tools RequiredMeasuring Tape or Ruler (Not Provided)Scissors (Not Provided)NOTE: Take care to stick the hook & loop tapeon straight. This step will determine how wellyour quilts load in the future. Use the SpringCoupler Snap Buttons as a guide when aligningthe hook & loop tape for best results.16-1: Prepare to attach the Velcro to the quilttop pole, backing pole, and take-up pole, bymeasuring in 3” from each end of the pole. Peelthe backing off the hook & loop tape as you goand apply to all three poles, starting at the 3”mark and ending at the opposite 3” mark. Takecare to stick the hook & loop tape on straight.This step will determine how well your quiltsload in the future. Use the spring buttons as aguide when aligning the hook & loop tape forbest results. Hint: Attach the hook & loop tapenext to the snap buttons, not between.Once the hook & loop tape has been adheredfrom one end of the poles to the other, it canbe clipped where the poles meet at the polecoupler.

/ 28

Related manuals for Baby Lock Pearl BLQF