Sewing the Various Built-in Decorative PatternsDecorative sewing D-9CHARACTER / DECORATIVE STITCHESDReturning to the beginning of the patternYou can return to the beginning of the pattern after trialsewing or when the stitching is sewn incorrectly.a Press the “Start/Stop” button to stop the machine, andthen press .→ Sewing returns to the beginning of the selectedpattern (“W”) from the point where sewing wasstopped.b Press the “Start/Stop” button to continue sewing.Saving a patternCombined patterns can be stored for later use. Since storedpatterns are not lost after the sewing machine is turned off,they can be recalled at any time. Up to 15 patterns can bestored.a Create the combined pattern that you wish to store.• For details, refer to “Combining patterns” onpage D-5.b Press on the operation panel.→ A screen showing the list of pockets appears, and anempty pocket is selected.c Press .• Do not turn off the sewing machine while the patternis being stored, otherwise the pattern data may belost.Memo• If this key is pressed when sewing is stopped,patterns can be added at the end of a combinedstitch pattern. (In this example, “!” is added.)Memo• To select the pocket where the pattern is to besaved, press or to specify thedesired pocket, and then press .• If the pattern is saved in a pocket where a stitch isalready saved, the stitch is overwritten.• If an empty pocket is not available, select apocket which contains a pattern that can beoverwritten.• Use to scroll the selected pockethorizontally to confirm the whole pattern.• Once the pattern has been saved in pocket, it cannot be deleted without overwriting. When youwish to delete a pattern in the pocket, presswithout selecting a pattern.