Baby Lock Soprano BLMSP Instruction And Reference Manual

Also see for Katherine BL210A: Getting to know

Contents

Baby Lock Soprano BLMSP Instruction And Reference Manual Manual pdf 45 page image

Setting the StitchBasic operations B-37STARTING TO SEWBThis machine is preset with the default settings for thestitch width and stitch length for each stitch. Some modelsare also preset with the default settings for upper threadtension for each stitch.However, you can change their settings or adjust them byfollowing the procedure described in this section.Setting the stitch widthThe stitch width (zigzag width) can be adjusted to make thestitch wider or narrower.Each press of “-” makes the zigzag stitch narrower.Each press of “+” makes the zigzag stitch wider.Setting the stitch lengthThe stitch length can be adjusted to make the stitch coarser(longer) or finer (shorter).Each press of “-” makes the stitch finer (shorter).Each press of “+” makes the stitch coarser (longer).Setting the StitchNote• Stitch settings return to their defaults if they arechanged, when the machine is turned off or adifferent stitch is selected before the stitchsetting is saved, refer to “Saving stitch settings”on page B-39.Memo• Press to return the setting to its default.• If the straight stitch (left needle position or triplestretch stitch) was selected, changing the stitchwidth changes the needle position. Increasing thewidth moves the needle to the right; reducing thewidth moves the needle to the left.• means the setting cannot be adjusted.CAUTION• After adjusting the stitch width, slowly turnthe handwheel toward you (counterclockwise)and check that the needle does not touch thepresser foot. If the needle hits the presser foot,the needle may bend or break.Memo• Press to return the setting to its default.• means the setting cannot be adjusted.