Baby Lock emore BLMR Instruction And Reference Manual

Also see for emore BLMR: Quick reference guide

Contents

Embroidering 592————————————————————————————————————————————————————cLower the presser foot lever.a Presser foot leverdPress / (“Start/Stop” button).a “Start/Stop” buttone After progressing 5-6 stitches, press /(“Start/Stop” button) to stop the machine.fUse scissors to cut the thread at the beginningof the stitching.Cut the thread at the edge of the stitching.• If the thread is left at the beginning of thestitching, it may be sewn over as youcontinue embroidering the pattern, making itvery difficult to deal with the thread after thepattern is finished. Trim the thread at thebeginning.gPress / (“Start/Stop” button) again.X The embroidery begins again.X Stitching stops automatically withreinforcement after one color has beencompleted. When automatic thread cuttingis set, the thread is cut.hPress (“Thread Cutter” button) once.a “Thread Cutter” buttonX The needle is raised and the threads are cut.CAUTIONiSet up embroidery thread for the next color,and repeat steps a through h.jCut the excess thread.X When the last color is embroidered,“Finished sewing.” will appear on thedisplay. Press , and the display willreturn to the initial screen.Memoz For the automatic cutting setting, refer to“LCD (liquid crystal display) operation”(page 51).11● Do not press (Thread cutter button)after threads have already been cut,otherwise the needle may break, thethreads may become tangled or damageto the machine may occur.● Do not press (Thread cutter button) ifthere is no fabric under the embroideryfoot or while the machine isembroidering, otherwise damage to themachine may occur.1