Baby Lock esante BLN Instruction And Reference Manual

Also see for esante BLN: Additional accessories guide Quick reference guide

Contents

LOWER/UPPER THREADINGGetting Ready251e While holding the thread from the spool inyour right hand, hold the end of the threadwith your left hand, and then pass the threadthrough the thread guide.a Thread guidef Pass the thread under the pin on the bobbinwinding thread guide, and then pass it aroundthe pretension disc.* Make sure that the thread passes under the pretension disc.a Pinb Pretension discg Wind the thread clockwise around the bobbinfour or five times.h Pass the end of the thread through the guideslit in the bobbin winder seat, and then pullthe thread to the right to cut it with thecutter.a Guide slitb Bobbin winder seati Slide the bobbin holder to the left until itsnaps into place.* When the bobbin holder is set to the left, it works as aswitch to make the bobbin wind automatically.a Bobbin holder (switch)→ The bobbin stops spinning automatically when it isfull, and the bobbin holder returns to its originalposition.j Cut the thread, and then remove the bobbin.CAUTION• Be sure to follow the process described. If the threadis not cut with the cutter, and the bobbin is wound,when the thread runs low, it may tangle around thebobbin.aab123abNoteWhen removing the bobbin, pull up only on the bobbin.Do not pull on the bobbin winder seat, otherwise it maybecome loose, resulting in damage to the machine.CAUTION• Setting the bobbin improperly may cause the threadtension to loosen, breaking the needle and possiblyresulting in injury.a