Baby Star snu:mee User Manual
               | |
PROBLEMS WITH WIFI CONNECTIONS:In case the Wi-Fi connection should fail, switch snu:mee off and back on and repeat aforementionedsteps. snu:mee’s battery may need to be recharged or you may need to get closer to the device withyour smartphone or tablet.5.2.2. APP AND SNU:MEE CONNECTEDAfter you have established a Wi-Fi connection with snu:mee and your smartphone or tablet, you canuse the Baby Stars – rock2sleep App to access snu:mee. Open the “Baby Stars – rock2sleep“ App onyour smartphone or tablet and click on “snu:mee Control“. The App will now establish a connection tosnu:mee. This procedure may take a couple of minutes in rare cases, and you will then be able to seesnu:mee’s currently active playlist on your smartphone or tablet.6. CONFIGURATION CHANGES WITH SNU:MEEYou are able to adjust snu:mee’s configuration settings to your individual needs.The following adjustments are possible:• Connect snu:mee to an existing Wi-Fi network• Change the network name and/ or the password• Do a firmware updateConfiguration changes are possible through the App as well as through a computer with Wi-Fi capabi-lities. You will need an Internet browser to do so.PLEASE NOTE: to connect snu:mee to a Wi-Fi network, you will need the access data (SSID and pass-word) of the respective Wi-Fi network.6.1. WI-FI NETWORK WITH SNU:MEE AND THE APP1. Make sure that your smartphone or tablet is connected with snu:mee (5.2.1.).2. Click on the gear wheel icon on the home screen of the App (settings).3. Click on Wi-Fi settings4. Your browser opens and connects to snu:mee‘s IP address.5. In case you are asked to enter a user name and password, please use:user name: adminpassword: admin6. The Wi-Fi settings of your snu:mee configuration will come up now. Please note: There’s alanguage selector at the top. Make sure it is set to English.7. When choosing a mode of operation, tick the box for “Repeater“.8. You will get a chance to “Connect to existing wireless network“.9. Please click on the button to “Search for networks“ and wait until you will be shown availablenetworks.10. Choose a Wi-Fi network by ticking a box of the desired Wi-Fi network. Then click on the button“select” below the list of Wi-Fi networks.11. Now the page with snu:mee’s Wi-Fi settings will open again and the previously selected Wi-Finetwork will already be displayed in the field “Network name (SSID)“.12. Please enter the Wi-Fi password in the respective “Password” field.Please note: In case you should not know the password, snu:mee cannot be connected with theWi-Fi network.8 |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine