Bacharach Fyrite Tech 50 Instruction, Operation & Maintenance

Also see for Fyrite Tech 50: Instructions Product catalog Quick start guide Operating and maintenance instructions

Bacharach Fyrite Tech 50 Instruction, Operation & Maintenance Manual pdf 22 page image

Instruction 24-942816Fyrite Tech4.1.5 Performing a Combustion Efficiency Test1. After turnng ON the analyzer and selectng the approprate fuel,press the  or  button until the Stack Temperature & EfficiencyScreen (refer to Secton 4.8.7) s dsplayed.2. Position the probe in the flue-gas stream to obtain the hottest“STACK” readng. Locating the highest stack temperature is veryimportant for accurate efficiency calculations.3. You can now begn burner-servce procedures. Use the  and buttons durng a test to scroll through the analyzer’s other dsplayscreens (refer to Secton 4.7). The analyzer readngs wll updatecontnuously showng changes n burner performance.4. Pressng the HOLD button freezes all readngs and stops the pump.The  and  buttons can now be used to scroll through the ds-plays and vew all test values at the moment the HOLD button waspressed. Pressng ENTER restarts the pump and resumes testng.4.1.6 Printing Test Results (Model 60 only)During a combustion efficiency test, the current test results can be sent toa prnter as follows:1. Turn ON prnter.TIP: Refer to the printer’s instruction manual for detailed operatinginformation. If not already done, set up the printer for 9600 baud,DTR handshaking, and the same protocol as the analyzer (HP orIrDA). Refer to Section 3.5.7 Selecting Printer Protocol.2. Algn the prnter wth the top of the analyzer as shown nFgure 4-1.3. Begn prntng by dong one of the followng:- If the pump s runnng, press the HOLD button twice.- If the dsplay has been prevously frozen by pressng the HOLDbutton, press the HOLD button only once.