Badger Meter Dynasonics TFX-5000 User Manual

Also see for Dynasonics TFX-5000: User manual Installation guide

Contents

Badger Meter Dynasonics TFX-5000 User Manual Manual pdf 41 page image

Display MenuRequires operator level passcode or higher if security is enabled An asterisk (*) indicates the parameter defaultDisplay Submenus Options/DescriptionsLANGUAGE*ENGLISH EnglishDEUTSCHE GermanESPAÑOL SpanishFRANÇAIS FrenchITALIANO ItalianDECIMAL # ##,# Select whether the decimal indicator is a period or a commaDISPLAY TAG ID *DISABLEDENABLEDDisplays the TAG ID on the Home Screen Default is TFX-5000Use SoloCUE to change the TAG IDBRIGHTNESS Select the display brightness 10…100% in increments of 10 Default is 70%CONTRAST Adjust the screen contrast 12…37 Default is 24DIMMER *ENABLEDDISABLEDEnable the DIMMER to reduce the display BRIGHTNESS after the buttons are notpressed for the TIMEOUT period Select the BRIGHTNESS level Default is 10%Press any button to awaken the transmitter and return to normal BRIGHTNESS Thebuttons pressed will not be active for one second after the transmitter is awakenedDIMMER LEVELOFF10%20%30%40%50%60%70%80%90%100%TIMEOUT5 MINUTES*10 MINUTES20 MINUTES30 MINUTES60 MINUTESSET TIME Numeric entry for 24 hour clock HH:MMSET DATE Numeric entry for date YYYY-MM-DDDISPLAY TIME 24 HOURAM / PMSelect format of the time to display on the home screen and on SoloCUEdashboardDISPLAY DATEYYYY-MM-DDMM-DD-YYYYDD-MM-YYYYSelect format of the date to display on the home screen and on SoloCUEdashboardInformation MenuAn asterisk (*) indicates the parameter defaultInformation Submenus Options/DescriptionsVENDOR BADGER METERMODEL TFX-5000P.N.: Badger Meter part numberS.N. Serial NumberFW VERSION Firmware Version xx xx xxxCAL. DATE Calibration Date YYYY-MM-DDDATE CODE Manufacture Date YYYY-MM-DDTAG ID 16 charactersParameter Descriptions by MenuPage 41October 2019 TTM-UM-02222-EN-04