Badger Meter HR-E LCD 4-20 Programmer's Manual
Also see for HR-E LCD: User manual
                        | |
Contents
| 
Programmer ParametersBilling Units FieldThe Billing Units field (Figure 19) displays the default units for which the customer is billed, and is indicated by dashed linesabove and below the totalizer reading The default is based on the Unit of Measure selected:Unit of Measure Default Billing UnitGallons, liters, imperial gallons 1000Cubic feet 100Cubic meters 1Click the drop-down menu to the right of the data field to select a Billing Units value If you do not want the dashed lines todisplay, select “0“ (zero) as the Billing Units valueFigure 19: Billing UnitsDigits from Encoder FieldThe Digits from Encoder field (Figure 20) displays the number of digits the encoder is programmed to send to the endpointThese options include 4, 5, 6, 7*, 8* and 9 digits Readings reported from an encoder programmed to 4, 5, 6, 7 and 8 digits arethe left-most significant digits Changing this value affects the Encoder Output fieldClick the drop-down menu to the right of the data field to select a different encoder output resolution* The 7- and 8-digit options apply to encoders with version 14 or laterFigure 20: Encoder digitsMPORTANTIBe very careful with the Digits from Encoder feature! Changes will affect the reading resolution sent to the endpoint and in yourreading data management system.Page 13May 2018 ENC-PM-02040-EN-03 |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine