INTRODUCTIONI-E96-624A 3 - 1SECTION 3 - INSTALLATIONINTRODUCTIONThis section explains special handling procedures, switch set-tings for each interface module, and how to install relatedhardware. Complete the preliminary procedures in this sectionbefore placing the INPPR01 into operation.SPECIAL HANDLINGPlant Loop to Plant Loop Interface modules use ElectrostaticSensitive (ESD) devices. Follow these handling procedures:NOTE: Always use the Bailey Field Static Kit (P/N 1948385A1)when working with interface modules. This kit connects the staticdissipative work surface and technician to the same ground point.1. Keep the modules in their special anti-static bags until youare ready to install them in the system. Save the bags forfuture use.2. Ground the anti-static bag before opening.3. Verify that all devices connected to the modules are prop-erly grounded before using them.4. Avoid touching the circuitry when handling the module.UNPACKING AND INSPECTION1. Examine the PPT, LIM and BTM immediately to verify thatthey have not been damaged in transit.2. Notify the nearest Bailey Controls Sales Office of any suchdamage.3. File a claim for any damage with the transportation com-pany that handled the shipment.4. Use the original packing material and/or container to storethe modules.5. Store the module in an environment of good air quality andfree from temperature and moisture extremes.INPPT01 SWITCH SETTINGSThe INPPT01 consists of two circuit boards, a memory boardand a CPU board. The memory board has no user-configurable
