Baldor DBSC105-AAA-1 Installation And Operating Manual

Also see for DBSC 100 Series: Installation and operating manual

Baldor DBSC105-AAA-1 Installation And Operating Manual Manual pdf 4 page image

Section 1Introduction and Conformity1–1MN1229IntroductionThe Baldor Series Controls represent the latest technology in microprocessorbased motor controls. The user programmable parameters available in everycontrol provides the ability to customize the control to most any application.Baldor has tried to ensure that the information in this manual is correct at thetime of printing. The information is subject to change without prior notice.This document is copyright by Baldor and is supplied with the understandingthat it will not be reproduced or disclosed in whole or in part, without theexpress permission of Baldor.ConformityThis product is only for use in industrial applications as described in EN 60204and VDE 0160. This means use DBSC100 in stationary ground basedapplications only. It is a component only and is not intended for immediate usewithin the meaning of “Safety law of appliance”, “EMC Law” or “Machinedirective”. It is the responsibility of the user to verify that the equipment theDBSC 100 is used in complies with all applicable regulations.The DBSC 100 Series AC Servo Control is intended for use in industrialinstallations. These controls are designed for applications that require speedcontrol of three phase AC Servo motors.The DBSC 100 conforms to the following standards:DIN VDE 0100 Power installations with nominal voltages ≤ 1000 VAC.DIN VDE 0110 Dimensioning of clearance tolerances.DIN VDE 0160 Electronic equipment for use in electrical powerinstallations.DIN IEC 326 Design and use of printed circuit boards.EN 60529 Degrees of protection provided by enclosure.