Baldor VS1GV21-1B Installation & Operating Manual

Contents

Baldor VS1GV21-1B Installation & Operating Manual Manual pdf 71 page image

Using the Keypad 6-9MN7656.7 Advanced ProgAt the Menu display screen, select ADVANCED PROG and press Enter. This menu provides access to all drive parameterswhich are organized in blocks that are grouped into one of 3 levels. Examples of tasks accomplished via this menu are:1. Adjustment of motor data not available in the basic parameters menu.2. Auto Tune the motor.3. Customize the drive parameters to your application.Parameter StatusAll programmable parameters are displayed with its parameter number shown at the bottom center of the display. “F” meansit is the factory setting value. “C” means it is a custom value set by the user. “V” means the parameter value may be viewedbut not changed while the motor is operating. If the parameter is displayed with an “L”, the value is locked and may not bechanged until the security code is entered.Action Description Display CommentsAdvanced Prog Display Top Level Advanced Prog menu.LEVEL 1 BLOCKSLEVEL 2 BLOCKSLEVEL 3 BLOCKSMODIFIED PARAMSLINEAR LISTblock parameters. orPress to view Level 2 blocks.Press to view Level 3 blocks.Press to view list of parametersthat have been changed from theirfactory settings or to view a list ofparameters organized by number.Press Enter to editLevel 1 parameters.Top of Level 1 Advanced ProgBlock 1 menu. PRESET SPEEDSRAMP RATESJOG SETTINGSKEYPAD SETUPINPUT SETUPPress to scroll to next level 1.Press Enter to selectPreset Speeds.Preset speed 1 value display. PROGPRESET SPEED 130 RPMF1001T1Press to go to next PresetSpeed parameter.Press Enter to editPreset Speed 1.Press or to increase ordecrease the value highlighted bythe cursor .EDITF1001T1PRESET SPEED 100030 RPMMAX RESETPRESET SPEEDS Press or to move cursor.Press “F1” to select the maximumallowable speed.Press to increase the value. EDITF1001T1PRESET SPEED 1000060 RPMMAX RESETPRESET SPEEDS Press F2 to exit editing the valuewithout saving or press Enter toexit and save the new value.Press Enter to save thenew value and stopediting.PROGC1001T1PRESET SPEED 160 RPMSTATUS BACKPRESET SPEEDS Press F2 to return to previousscreen.Press F1 to go to Status screen.STATUS BACKSTATUS BACKSTATUS BACKPRESET SPEEDSblockPress enter to program level 1Parameter values in other Level 1, 2 and 3 blocks can be selected and edited in the same way.