Balluff BNI EIP-306-100-Z010 User Manual

Contents

Balluff BNI EIP-306-100-Z010 User Manual Manual pdf 12 page image

www.balluff.com 114 Technical data4.5. Ethernet Ethernet IP port 1 x 10Base-/100Base-TxConnection for Ethernet IP port M12, D-coded, femaleCable types per IEEE 802.3 Shielded twisted pair min. STP CAT 5/ STP CAT 5eData transmission rate 10/100 Mbit/sMax. cable length 100 mFlow control Half Duplex/Full Duplex (IEEE 802.33x-Pause)4.6. FunctionindicatorsLED Display FunctionUA green Output power OKred Low Output power (< 18V)Modgreen flashing Wrong or no configuration on modulegreen Module operatingred flashing Fixed busclock is not possiblered-green flashing Initial sequenceNetoff Module got no IP addressgreen flashing Module got IP, but no connection could beestablishedgreen Connection establishedred flashing Connection timeoutred-green flashing Initial sequence100 off Bus clock: 10 Mbit/syellow Bus clock: 100 Mbit/sUS green Input power OKred Low Input power (<18V)LNK green Data transferPort Each Port has two two colour LED´s to indicate the I/O-States.Display Function Descriptionoff I/O-State State of the Input or Output Pin is 0yellow I/O-State State of the Input or Output Pin is 1red Short-circuit single LED:Short-circuit on dedicated Pin (only if this pin is usedas an output)both LEDs:Short-circuit between Pin 1 and 3 or Short-circuit onboth output pinsStatus –LEDs: Modul statusPort/Pin LEDs: Status of the IO Link and I/O ports