Balluff BNI EIP-508-005-E002 User Manual

Also see for BNI EIP-507-005-Z040: Installation guide

Balluff BNI EIP-508-005-E002 User Manual Manual pdf 21 page image

Balluff Network Interface EtherNet/IP™www.balluff.com 206 Configuration via Explicit MessagesQuickConnect The BNI EIP-508-005-E002 module can be launched and connected fastervia the QuickConnect function.Enabling QuickConnect automatically takes over all necessary port properties on the module:• Static IP address• Ports at 100 Mbps full-duplex• Auto-negotiation disabled• Auto MDI-X disabled• Prepared for linear topologyYou can configure QuickConnect via the followingclass instance attribute of the explicit messages:Class Instance Attribute Value245 (0xF5) 1 (0x01) 12 (0x0C) 0: disabled (default)1: enabledNoteFor QuickConnect to be enabled, ACD (Address Conflict Detection) must also beenabled. This is switched on by default.The ACD can be reviewed and changed using the following class instance attributes of theexplicit messages:Class Instance Attribute Value245 (0xF5) 1 (0x01) 10 (0x0A) 0: disabled1: enabled(default)