6 STARTUP44BAE PD-VS-014-05www.balluff.com5. Set the desired IP address and connection parameters for the Balluff Smart Vision Con-trollers under Module Properties.The fieldbus parameters are set in the System settings on the "Communication" tab.PROFINET is preselected by default. The fieldbus can be changed at any time betweenPROFINET and EtherNet/IP.6.6.3 EtherNet/IP param-eters in BVS Cock-pitNOTEAfter switching the fieldbus and after setting a few fieldbus parame-ters, an internal restart of the fieldbus module is necessary. This pro-cess will take some seconds until the dialog is refreshed and the ad-justed settings are displayed.
