Bang & Olufsen BeoVision 8 User Manual

Also see for BeoVision 8: Reference book User guide User manual

Bang & Olufsen BeoVision 8 User Manual Manual pdf 17 page image

17One remote control for both televisionsTwo televisions in the same roomIf you have placed your BeoVision 8in a room where you already have aBang & Olufsen television, andcommands from Beo4 can bereceived by both televisions, youmust change the option setting ofBeoVision 8. This preventssimultaneous activation of bothtelevisions.For your television to function properly, it isessential that the television is set to thecorrect Option:To set your television for Option 4 …> While holding the • button on Beo4, press LIST.> Let go of both buttons.> Press LIST repeatedly to display OPTION? onBeo4 and press GO.> Press LIST repeatedly to display V.OPT on Beo4and press 4.Operate your television in Option 4 …Normally, you can activate a source, such as TV,simply by pressing the relevant source button onBeo4. However, when you set your television toOption 4, you must do the following:> Press LIST repeatedly until LINK* is shown inthe Beo4 display.> Press a source button, such as TV.*In order to display LINK on Beo4, you must add it tothe Beo4 list of functions. For further information,refer to the Guide enclosed with Beo4.In order to use teletext on a television you have setto Option 4, you must set up Beo4 to ‘VIDEO 3’,but this limits the Beo4 functions that can be usedwith televisions set to other Options. For furtherinformation, refer to the Guide enclosed withBeo4.BeoVision 8Option 4TVLISTLINKTV