Bang & Olufsen BeoVision 8 User Manual

Also see for BeoVision 8: Reference book User guide User manual

Bang & Olufsen BeoVision 8 User Manual Manual pdf 9 page image

9Picture formatSpeaker combinationIf you connect loudspeakers to your television,you can change the speaker combination atany time.Press repeatedly to displaySPEAKER on Beo4Press to select a speakercombinationPress to adjust the balancebetween the front and rearspeakersPress to adjust the balancebetween the left and rightspeakersPress to remove SPEAKER fromthe Beo4 display and return tothe source you were usingSpeaker combinationsSPEAKER 1 … Sound in the centre speaker only.SPEAKER 2 … Stereo sound in the front speakers.Subwoofers are active.SPEAKER 3 … The centre speaker, front speakersand subwoofers are active.SPEAKER 4 … The front speakers, surroundspeakers, and subwoofers are active.SPEAKER 5 … Surround sound from all speakersand subwoofers.Available speaker combinations depend on thenumber of connected speakers.Select a picture format to optimise the picture.Press repeatedly to displayFORMAT on Beo4Press if you want to optimise thepicture, or …… press the number of thedesired picture formatIf you have chosen Format 1or Format 4 …Press or to select variationsof this formatIf you have chosen Format 1*or Format 2 …Press or to move thepicture up and downPress to leave the FORMATfunction*Pictures in 4:3 format cannot bemoved up and down.Picture formats to choose from …FORMAT 1 … For standard TV pictures. Threevariations are available: 4:3, 15:9 and Panoramicview (for the largest picture).FORMAT 2 … For letter box pictures. If necessarymove the picture up or down to ensure thatchannel names or subtitles – if these appear inthe broadcasted picture – can be seen. In somecases FORMAT 2 is selected automatically.FORMAT 3 … For genuine 16:9 wide screenpictures. FORMAT 3 is usually selectedautomatically. If this is not the case, you canselect it yourself.FORMAT 4 … A video signal in Format 4 uses the16:9 format and removes any bars at the sides.A graphics signal, for example from a PC, inFormat 4 displays the centre part of the picture.When displaying a graphics signal in Format 4,you can select the left or right part of thepicture with and , respectively.To temporarily remove the picture from the screen,press LIST repeatedly to display P.MUTE on Beo4,then press GO. To restore the picture again, pressany source button, such as TV.LISTFORMATGO1 – 4EXITLISTSPEAKER1 – 5EXITNOTE! For further information about how toconnect speakers to the television, refer to thechapter ‘Connection panels’ on page 51.