Bang & Olufsen BeoVision 9 Manual

Also see for BeoVision 9: Guide Guide

Bang & Olufsen BeoVision 9 Manual Manual pdf 50 page image

First-time setup of your television1*TV tunerConnectionsIf you select ‘CABLE BOX’, follow the on-screen information to specify whichcable box you have connected to the TV. If you select ‘ANTENNA’ or ‘CABLE’,a scanning process begins when you store the setting.Select the type of equipment connected to each socket, the sockets used, theproduct name, and the source name.InformationThis first-time setup procedure is activated when the TV is connected to the mainsand switched on for the first time. If you want to change your setup at a later date,you can access the same menus and update your settings.Switch on the TVMake settingsYou are led through the following settings onlywhen you switch on the TV for the first time.*2It takes the TV approx. 20 seconds to start up andbecome ready for use.Switch onSelect setting Accept and go to next menu itemDisable or enable internal TV tuner or ATSC, see p. 35*1Register connected equipment, see p. 432* NOTE! When you have made the preferredsettings in a menu, you may have to press thegreen button to continue to the next menu in thefirst-time setup procedure. Follow on-screeninstructions.TVTUNER SETUPCONNECTIONS48